Getting Started; Setting Up The Hardware; Supplied Software - Samsung ML-2545 User Manual

getting started

2.
This chapter gives you step-by-step instructions for setting up the USB connected machine and software.
This chapter includes:
•

Setting up the hardware

•

Supplied software

• System requirements
Setting up the hardware
This section shows the steps to set up the hardware, as is explained in the
Quick Installation Guide. Make sure you read the Quick Installation Guide
first and follow the steps below:
Location
1. Select a stable location.
Select a level, stable place with adequate space for air circulation. Allow
extra space to open covers and trays.
The area should be well ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the
altitude setting to optimize your printing. (See "Altitude adjustment" on
page 25.)
Place the machine on a flat, stable surface so that there is no incline
greater than 2 mm (0.08 inch). Otherwise, printing quality may be
affected.
2. Unpack the machine and check all the enclosed items.
• Installing USB connected machine's driver
• Sharing your machine locally
3. Remove tape holding the machine securely.
4. Install the toner cartridge.
5. Load paper. (See "Loading paper in the tray" on page 27.)
6. Make sure that all cables are connected to the machine.
7. Turn the machine on. (See "Turning on the machine" on page 19.)
This machine will not operate when the power main fails.
Supplied software
After you have set up your machine and connected it to your computer, you
must install the printer software. If you are a Windows or Macintosh OS
user, install the software from the supplied CD and if you are a Linux OS
user, download the software from the Samsung website
(www.samsung.com/printer) and install.
Machine software is occasionally updated for reasons like the release
of new operating system and etc. If needed, download the latest
version from the Samsung website (www.samsung.com/printer).
OS
Windows •
•
•
Macintosh •
•
Linux •
•
•
Getting started_ 20
Contents
Printer driver: Use this driver to take full advantage of
your machine's features.
Samsung Easy Printer Manager: Samsung Easy
Printer Manager combines device settings as well as
printing environments, settings/actions and launching. All
of these features provide a gateway to conveniently use
your Samsung machine.
Samsung Printing Status: This program allows you to
monitor the machine's status and alerts you when an
error occurs during printing.
Printer Driver: Use this driver to take full advantage of
your machine's features.
Samsung Easy Printer Manager: Samsung Easy
Printer Manager combines device settings as well as
printing environments, settings/actions and launching. All
of these features provide a gateway to conveniently use
your Samsung machine.
Unified Linux Driver: Use this driver to take full
advantage of your machine's features.
Smart Panel: This program allows you to monitor the
machine's status and alerts you when an error occurs
during printing.
Printer Settings Utility: This program allows you to set
up printer's other options from your computer desktop.