INSTALLATION Remove all packing material and place the stove on a flat level surface. ELECTRICAL INSTALLATION The stove should be connected to the mains through a double pole isolating switch which has a minimum clearance between the contacts of 3 mm. in all poles. The appliance must be connected by means of wires having an appropriate temperature marking.
SPIRAL PLATES The markings around the plate control knobs represent the following heat settings: Position 1-4 = Gentle simmer to simmer. Position 4 -6 = Fast simmer to medium heat Position 6-8 = Hot to maximum heat The relevant plate indicator light will glow when a plate is switched on.. SPIRAL PLATE CARE Use pots with a base diameter slightly larger than the plate.
STORAGE COMPARTMENT (SPIRAL) This compartment may be used to store pots, pans and dishes CLEANING (SPIRAL) EXTERIOR Switch off the electrical supply to the stove before cleaning any part of it Use a damp soapy cloth and avoid the use of abrasive powders and scouring pads. OVEN Switch off the electrical supply to the stove before cleaning any part of it.
CONTROLS PLATE CONTROLS OVEN CONTROL The Ringer timer may be used for timing the cooking process for up to one hour. Wind up the timer by turning the knob fully clockwise and return the knob to the setting required. At the end of the time period the bell will ring. FEATURES CONTROLS CONTROLS...
WARNING SURFACE AREAS OF HEATING AND COOKING APPLIANCES AS WELL AS ELEMENTS AND OVEN INTERIORS GET HOT ALWAYS KEEP CHILDREN WELL AWAY WHEN THE UNIT IS IN USE...