Speaker Assembly Method - Samsung HT-DS960 Instruction Manual

Speaker Assembly Method

The speakers can be installed on stands or a wall, depending whether the RRSS or SDSM speaker
installation configuration is used.
Read the following instructions on speaker assembly carefully and install the speakers correctly.
Speaker Components
Check the components before assembling and installing the speakers.
Front Speaker (2EA) Rear Speaker (2EA)
Front Stand (2EA) Rear Stand (2EA)
Speaker Accessories
Brackets (2EA) Speaker wires (6EA)
Note
•
If you install it the rear speaker on the front speaker, you can adjust the rear speaker's angle by rotat-
ing it 30° to the right or left.
11
Center Speaker Subwoofer
Front Speaker Cover (2EA)
Screws (2EA)
Installing speakers in the RRSS
(Rear Reflecting Surround System)
Installing speakers on Front stands
Follow the instructions and install the
speaker as shown below.
1
Install the front
speaker on the front
Front Speaker
stand.
Front Stand
3 Install the rear speak-
er on the front speak-
Rear Speaker
er.
Front Speaker
Note
• It is recommended to connect the speaker line at the rear of front stand when you install it in stand
type. (The sound is output same if you connect to the rear of front speaker.)
Configuration using stands
2
Turn the screw on the
rear of front speaker
to fasten it.
Phillips
Screwdriver
4 Connect the
rear speaker
wire and front
speaker wire on
the rear of front
Rear Speaker wire
stand.
Front Speaker wire
12