Listening To Radio; Presetting Stations - Samsung HT-DB8030 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, MW, LW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
1 2
Tune in to the
Press TUNER/
BAND button. desired station.
• Automatic Tuning 1
The selection toggles back
and forth between "FM AM "
each time the TUNER(BAND)
button is pressed.
Automatic Tuning 2
Manual Tuning
Main Unit
Press the Function
1 2
Select a broadcast
button to select the
desired band (FM, station.
AM).
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
then press and hold
automatically search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
55
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
When is pressed, a
preset broadcast station is
selected.
Press and hold to
automatically search for
active broadcasting stations.
Briefly press to
increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "MANUAL" and
button to
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or

Presetting Stations

You can store up to:
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
Press the
1 2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
• •
Each time the button is pressed, Refer to Step 2 on page 55 to
the band switches between automatically or manually tune in
"FM MW LW". to a station.
TITLE CHAP PRGM RDS RT ST TUNED TITLE
kHz
MHz
Press to
4 5
Press the TUNER
select preset
MEMORY button.
number.
• •
You can select between 1 and Press the TUNER MEMORY button before
'PRGM' disappears from the display.
15.
•
'PRGM' disappears from the display and
the station is stored in memory.
TITLE
TITLE RDS RT ST TUNED
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
• FM Frequency Modulation
• AM(MW) Medium Wave
3
Press the TUNER
to
MEMORY button.
•
"PRGM" flashes in the display.
CHAP PRGM RDS RT ST TUNED TITLE RDS RT
kHz
MHz
To preset another
6
station, repeat
steps 2 to 5.
CHAP RDS RT ST TUNED
kHz
MHz
on the
ST TUNED
kHz
MHz
56