Connecting External Components - Samsung HT-DB8030 Instruction Manual

Connecting External Components

Connecting an External Digital Component
Example: Digital signal components such as a DVD or CD Recorder.
Optical Cable
(not included)
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
15
VOLTAGE
SELECTOR
The AC Cord must be plugged into an appropriate
socket.
Before plugging your system into an AC outlet, you must
check the voltage.
Check the position of the voltage selector on the rear of the
system
(OPTIONAL).
DIGITAL OUT
1. Plug the AC Cord on the rear of the system into an
appropriate outlet.
2. Press the On/Standby button to switch your DVD Player
system on.
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
R
L
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX 1 or AUX 2.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
VOLTAGE
SELECTOR
VIDEO OUT VIDEO IN COMPONENT VIDEO OUT
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
16