Table of Contents
Advertisement
• Homepage URL: enter the URL address
of the page to be used as your
homepage.
• Proxy: activate or deactivate the proxy
server.
• IP address: enter the IP address of the
proxy server.
• Port: enter the port number of the proxy
server.
• Linger time: set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
• DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
• DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
• Bearer: select the network bearer type.
• Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone
number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following
options:
• Edit: edit the selected profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
105
Advertisement
Table of Contents
