Table of Contents
Advertisement
2. Adjust the image by aiming the camera lens at the
subject.
•
Press the left soft key to access camera
options. See the next section.
•
Use the keypad to change the camera settings
or switch to other modes.
3. Press [
] to take a photo. The photo is saved in
the Photos folder.
4. To
use photo options
delete the photo
return to Capture
mode
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
•
Record video: switch to Record mode.
•
Shooting mode: take a photo in the following
modes:
p. 72
Press
<Options>.
p. 73
<Delete> and then <Yes>.
[
].
Single shot: take a photo in normal mode.
Multi shot: take a series of action stills. Select the
number of photos the camera will take.
Mosaic shot: take several stills and save them in
one frame. Select the number of still images the
camera will take.
•
Effects: change the colour tone or apply a special
effect to photos to be taken.
•
Frames: apply a decorative frame to photos to be
taken.
•
Flash: determine the flash use.
•
Timer: set a time delay before the camera takes a
photo.
•
Go to photos: go to the Photos folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview screen.
71
Advertisement
Table of Contents
