Table of Contents
Advertisement
Once successfully paired to an external device,
appears within the Status area.
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Samsung Replenish™,
but retains the knowledge of the pairing. At a later point
when you wish to reconnect the device, there is no
need to set up the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, touch the
previously paired device (from the bottom of the
page).
124
2I. Bluetooth
3.
Tap
to confirm disconnection.
OK
– or –
From the Bluetooth settings page, touch and hold
the name of the previously paired device, and
.
select
Disconnect
Note:
Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your Samsung Replenish™ or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its "connection
record" and upon reconnection would require that you
re-enter all the previous pairing information.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, touch and hold
the name of the previously paired device (from the
bottom of the page). This opens the connected
device's menu options.
3.
Tap
Disconnect & unpair
to confirm deletion.
Advertisement
Table of Contents
