Table of Contents
Advertisement
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery recharges fully in approximately 4 hours.
Using the Travel Adapter
With the battery installed, slide the plastic cover open (top
1.
left side of phone)
Important!: Verify that the handset battery is installed prior to connection. If
the battery is not properly installed and the wall charger is
connected, the handset may power off and on continuously,
preventing proper operation.
.
Plug the flat end of the Travel Adapter into the Power/
2.
Accessory Interface connector and the other end into a
standard AC wall outlet.
When charging is finished, remove the flat end from the
3.
interface connector jack on the phone.
Warning!: If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch screen may damage the
tempered glass surface and void the warranty. For more
information, refer to "Standard Limited Warranty" on page 177.
Note: Failure to unplug the wall charger before you remove the battery, can
cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power, not by turning off the
backlight, but by entering the dimming mode. For a quick check
of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device's display. Solid
color (
) indicates a full charge.
) blinks and the device sounds a
Getting Started
8
Advertisement
Table of Contents
