Getting Started - Sonic Blue Volt SP250 User Manual

Getting Started

You will need the following items to start using your new RioVolt:
• The RioVolt SP250
• 2 Rechargeable Batteries (included)or 2 AA Alkaline Batteries (not included)
• RioVolt AC Adapter (included)
• Headphones or earphones (included) or powered speakers (not included)
• Remote Control (included)
1. Unpack the RioVolt SP250 and all of its components.
2. Open the Battery Compartment Door by sliding it away from
the RioVolt and insert 2 batteries.
3. Slide the Battery Compartment Door back to its original
position to close.
4. Plug the RioVolt AC Adapter into the Power Port on the side
of the RioVolt and into a power outlet.
NOTE: Let the RioVolt batteries charge up for X hours
before playing the RioVolt SP250 without the AC
Adapter attached and plugged into a power
outlet or insert 2 AA Alkaline batteries (not
included).
5. Plug the Headphones Cable into the
Headphones Port on the side of the RioVolt.
OR
To use the Remote Control, plug the Headphones
Cable into the Remote Control, and then plug the
Remote Control Cable into the Headphones
Port on the side of the RioVolt.
The Remote Control can then be clipped to your
clothing for easy access.
NOTE: Another option is to plug a pair of powered speakers into the RioVolt's Lineout
Port instead of using headphones.
Getting Started
Headphones
Lineout
Port
Port
Return to Pg.1
Page 6
Battery
Door
Power
Port