Using the FM Tuner
By pressing the CD-FM button on the RioVolt or the VOLUME/CD-FM/
MODE click wheel on the remote control you can toggle between playing
CDs and listening to FM radio stations.
•
Press
and
to tune the FM frequencies in 0.1 intervals.
•
Press and hold
or
stations.
•
Press MODE to select whether you want it played in STEREO or not.
•
Press +10/EQ to select whether you want it played with DBB or not.
Creating Presets
1. Tune the RioVolt SP250 to the desired station frequency using
2. Press PROGRAM to mark the station.
MEMORY will appears in the display followed by CHANNEL # where # is a number from 1-20.
3. Select the Preset Number you want by pressing
Each time you press PROGRAM, it will increase the CHANNEL # by one.
Recalling Presets
1. Press NAVI/MENU to bring up the Presets.
2. Press
and
to cycle through the stored Presets until you locate the one you want.
The Remote Control
The Remote Control Cable plugs into the Headphones
Port on the side of the RioVolt. The headphones then plug
into the end of the Remote Control.
NOTE: To buy the upgraded remote control
with display, got to www.riohome.com.
Remote Control Buttons
VOLUME / CD-FM / MODE Click Wheel
VOL
•
Press the click wheel towards the
•
Press the click wheel toward the
volume.
CD-FM
•
Press in and hold the click wheel for 1.5 seconds to
toggle between playing CDs and listening to FM stations.
•
Press
and
to tune to your favorite radio stations.
MODE
•
Press the click wheel in and let go to toggle through the Repeat/Shuffle modes.
HOLD Switch
•
Slide Hold Switch ON in the direction of the arrow to lock buttons or OFF to unlock the buttons.
to scan through the FM frequencies for available
+
to increase volume.
-
to decrease the
Using the FM Tuner
and
.
or
to increase or decrease the number.
Return to Pg.1
Page 21
Hold
Switch