Ricoh AP610N Installation Manual

Envelope Feeder

Type 2600
For Machine Code: G056/G058/G073/G074/G091

INSTALLATION GUIDE

Important
Do not slide more than one paper tray out at the same time. Having more than one paper tray filled with paper in a fully extended position could
cause the machine to fall down.
Check the printer nameplate to confirm the model code.
Check the contents of the box for the following items:
Description
Envelope Feeder
Installation Guide (This sheet)
Pull out the second paper tray (tray 2) of the
optional Paper Feed Unit until it stops. After that, lift
it slightly, and then pull it out.
Important
The Envelope Feeder must be used in the top-most optional
Paper Feed Unit (tray 2).
The tray of the top-most optional Paper Feed Unit is beneath
the paper tray.
Note
Keep the paper tray with paper in a cool dark place.
(Code: G556)
This unit is a tray that slides into the optional Paper Feed Unit.
Without the optional Paper Feed Unit, this Envelope Feeder cannot
be used.
Your printer can have two optional Paper Feed Units. However, the
Envelope Feeder must be used in the top-most optional Paper Feed
Unit (tray 2) . It cannot be used in the bottom-most optional Paper
Feed Unit (tray 3).
The tray of the top most optional Paper Feed Unit is beneath the
paper tray.
Q'ty
1
1
ZDDP330E
Printed in Japan
While lifting the front side of the Envelope Feeder, place
the feeder into the printer. Then slide it into the printer
until it stops.
Note
For information about loading paper, see "Loading Paper in
the Optional Paper Tray" in the Printer Reference is provided
as a PDF file on the CD-ROM labeled "Operating Instructions".
Copyright © 2000-2003
ZDDP340E
G556-8600B