Table of Contents
Advertisement
Main Menu
Audio
0
Go Back
The Audio Connections menu has screens for setting up
inputs or outputs that are associated with audio:
1
Equalizer Presets
2
Audio Processor
•Digital Audio Out: Choose either Auto Select or PCM output.
•DVI Audio Input: Choose a TV audio input for a DVI device.
3
Sound Logic
4
Audio Language
5
SAP
6
Balance
7
Fixed/Variable Out
Audio Connections
8
Dynamic Bass
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Main Menu
Audio
Audio Connections
0
Go Back
Auto Select
1
Digital Audio Out
PCM
2
DVI Audio Input
Choosing Auto Select will send a Dolby Digital signal (when
available) out of the DIGITAL AUDIO OUTPUT on the back of
the TV. If Dolby Digital is not available then a PCM signal is
sent out of the DIGITAL AUDIO OUTPUT.
Choosing PCM will always send a PCM signal out of the
DIGITAL AUDIO OUTPUT.
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Main Menu
Audio
Audio Connections
0
Select the TV audio input where the DVI audio is connected.
Go Back
Input 1
1
Digital Audio Out
Input 2
2
DVI Audio Input
Because an HDMI output carries the audio signal on the same
cable as the video, no setup is needed. However, if you
connect a DVI output to the TV's HDMI input, you need to
connect the separate DVI audio to one of the TV's audio
inputs and select that input in this screen. The TV will use
that audio input for sound when it displays a DVI signal.
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Main Menu
Audio
0
Go Back
Off
1
Equalizer Presets
Medium
2
Audio Processor
High
3
Sound Logic
4
Audio Language
5
SAP
6
Balance
7
Audio Connections
Fixed/Variable Out
A change in the screen is applied to all inputs.
8
Dynamic Bass
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Main Menu
0
The Connections menu has screens for specifying and
Go Back
optimizing the connections (inputs) to the TV:
1
Picture Quality
•Signal Strength: Check the signal strength of a channel.
2
Audio
Audio
•Channel Search: Search for available channels in your area.
3
Parental Controls
•Software Upgrade: Check software version and upgrades.
4
•Signal Source: Lost remote? This screen changes inputs.
Connections
•Video Input Setup: Choose component or composite video.
5
Preferences
•Auto Tuning: Create one button access to your devices.
6
Assisted Setup
•Special Features: For advanced users only.
•Ethernet Setup: Configure the Ethernet connection settings.
Press OK or to access the Audio menu.
Chapter 4
Using the TV's Menu System
Audio Connections
The Audio Connections option lets you set up input or outputs associated with
audio. When you select the Audio Connections feature, a submenu appears with
options: Digital Audio Out and DVI Audio Input.
Digital Audio Out Allows you to receive Dolby Digital surround sound if
transmitted and you've connected a six-channel receiver to the TV's
DIGITAL AUDIO OUTPUT jack with a digital optical cable. Choose the
correct setting in the Digital Audio Out menu:
• Auto Select Your TV automatically chooses between Dolby Digital
and PCM based on the audio signal it is receiving. This is the best
selection if you have a decoder with Dolby Digital and PCM that was
manufactured in the last several years.
• PCM (Pulse Code Modulation) The TV sends all signals through the
Digital Audio Output in PCM.
DVI Audio Input Allows you to select the audio input you're using if
you've connected an HDMI/DVI cable adapter to the DVI input. Select from
the inputs listed.
Dynamic Bass
The Dynamic Bass option provides additional bass enhancement for the audio.
Choose Off, Medium, or High depending on your preference.
Connections Menu
The Connections menu specifies various ways to adjust the inputs to your
television. Items in the Connections menu are: Signal Strength, Channel Search,
Software Upgrade, Signal Source, Video Input Setup, Auto Tuning, Special
Features, and Ethernet Setup.
49
Advertisement
Table of Contents
