Download Print this page

Power Acoustik STAX-1200/4 Brochure page 26

Power acoustik stax-1200/4: product brochure
Hide thumbs Also See for STAX-1200/4:

Advertisement

signal processor
BASS-10
Max. Bass Control
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz–100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
BASS-12
DG-7Q
DIGI-Q (DIGItal-EQ) does more than just alter your music. It gives you 7 bands of equalization,
subwoofer crossover and level controls as well as an extra audio input for a secondary source.
You can control all this from the DIGI-Q with only one knob. A few clicks and turns of the knob
and you can scroll through all the EQ settings, level controls, system voltage meter and even a
true frequency counter for the outputs. Imagine the innovation involved in this one little half din
unit. Extend your function...get DIGI-Q.
• Output Voltage Up to 8 V
Subwoofer Output Voltage Up to 10 V
Frequency Response 15HZ ~ 30KHZ
THD+n (1vrms output) = 0.002%
Input sensitivity = 0.3 ~ 1.5 Vrms
Channel separation (L – R) = 79db
Source voltage range = 9.5 ~ 14.2
Current consumption 2amps (all outputs @ max.)
B/C control range = 20 db (+10 to -10db)
Subwoofer output freq. range 180~550 (LP)
Frequency bands: #1-57HZ, #2-134HZ, #3-400HZ, #4-1KHZ,
#5-2.2 KHZ, #6-6.3KHZ and #7-16KHZ
26
S53075.indd 26
Max. Bass Control
Dash Mount Remote Control
PFM Subsonic Filter & Bass Level Control
Illuminated Logo Plate
Chrome Finish
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz–100KHz
THD: 0.002%
S/N Ratio: 132dB
Balanced Input Noise Rejection: 60 dB
12/31/08 11:39:14 AM

Advertisement

loading

This manual is also suitable for:

Stax-1600/4Stax-1800/2Stax-1250/2