Switching The Automatic And Manual Function; Aux; Selecting Aux As The Source; Av Input (Av) - Pioneer AVIC-N3 Operation Manual

1
Touch "FUNCTION 1" - "FUNCTION 4" in
the FUNCTION menu.
2
Touch "SEND".
The operation command is transmitted to the
external unit.
Switching the automatic and
manual function
You can turn automatic and manual function on
or off.
You can switch between AUTO and MANUAL
functions of the external unit connected.
Initially, this function is set to AUTO.
❒ Operating commands set for AUTO and
MANUAL operations vary depending on the
external unit connected.
1
Touch "AUTO / MANUAL" in the FUNC-
TION menu.
Touching "AUTO / MANUAL" switches
between "AUTO" and "MANUAL".
106

AUX

An IP-BUS-RCA Interconnector such as the
CDRB20/CD-RB10 (sold separately) lets you con-
nect your navigation system to auxiliary equip-
ment featuring RCA output. For more details,
refer to the IP-BUS-RCA Interconnector owner's
manual.

Selecting AUX as the source

1
Touch the source icon and then touch
"AUX" to select AUX as the source.
When the source icon is not displayed, you
can display it by touching the screen.
❒ If the auxiliary setting is turned off, "AUX"
cannot be selected.
❒ When "AUX" is set to "ON", you can select
"AUX" as a source.
➲ Switching the auxiliary setting ➞ Page 112

AV Input (AV)

• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the parking brake
before setting your route (see page 13
Interlock for details).

Selecting AV as the source

1
Touch the source icon and then touch
"AV" to select AV as the source.
When the source icon is not displayed, you
can display it by touching the screen.
❒ If you want to switch AV source, select
"VIDEO" in "AV INPUT".
➲ Selecting the video input ➞ Page 114