Sources - Pioneer DV-610 Operating Instructions Manual

HDMI output with DVD-Audio and SACD sources
The way audio sources are output from the HDMI terminal depends on the specification of the
connected component.
Components specification
Component SACD, DVD-Audio
/output and 5.1 channel
compatible on
1
HDMI
DVD-Audio and 5.1
channel compatible
on HDMI
DVD-Audio and
2 channel
compatible on
1
HDMI
Incompatible with
DVD-Audio on
1
HDMI
1. This unit checks the specification of the connected component (such sample rate/multichannel limitations and
compatibility with protected audio contents) and outputs the signal accordingly. Note that 'DVD-Audio compatible'
indicates compatibility with protected audio contents. 'SACD compatible' indicates compatibility with DSD signals.
2. If HDMI Out setting (page 38) is set to LPCM (2CH), DVD-Audio multichannel sources will be downmixed to
stereo. (In cases where the source is downmix-prohibited, only the front left/right channels are output.) For SACD
sources, the 2 channel (stereo) SACD audio area is selected.
If the video output resolution is 480i, 576i, 480p or 576p, audio output may be limited to 2 channel (depending to the
connected component).
3. In cases where the source is downmix-prohibited, only the front left/right channels are output.
4. If CPPM shows in the front panel display, it means it is not possible to output CPPM copycontrolled DVD-Audio
sources from the HDMI connection. Discs with no CPPM protection are limited to 2 channel output.
Example
component
SC-LX90
VSX-LX50
VSX-AX4ASi-S
VSX-AX2AS-S
1
PDP-LX6090H
PDP-LX6090
PDP-LX5090H
PDP-LX5090
PDP-505XDE/
HDE
Disc format
(DVD-Audio or SACD)
2ch 5.1ch
2ch 5.1ch
2ch 5.1ch
2ch Left/Right or
2ch downmix
4
No sound No sound
SACD
Auto (DSD)
2
DSD 2ch/
5.1 ch
2
No sound
No sound
3
4
No sound
08
47
En