Advanced Settings; Changing The Settings; Operating The Initial Setup Screen - Pioneer BDP-140 Operating Instructions Manual

Chapter 7
07

Advanced settings

Changing the settings

Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player's status.
• In Options, the factory default settings are indicated in bold.
Setting
TV Screen
Video Adjust
Sharpness
Video Mode
Noise Reduction
40
En
Options Explanation
16:9 Full
Select this when connecting to a wide (16:9) TV.
16:9 Normal Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Pan&Scan Select this when connecting to a conventional (4:3) TV.
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
Brightness Select this to adjust the TV screen's brightness .
Contrast Select this to adjust the TV screen's contrast.
Hue Select this to adjust the color (green and red) balance of the TV screen.
Saturation Select this to adjust the TV screen's saturation .
High Choose the level of sharpness.
Middle
Low
Standard
Choose the video output mode.
Vivid
Cinema
Custom
0 Choose the level of noise reduction.
1
2
3
Operating the Initial Setup
screen
1 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
2 Select and set Initial Setup.
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use /// to select, then press ENTER.
 Closing the Initial Setup screen
HOME MENU or EXIT.
Press