Switching Between The Detail Information Dis- Play And The Preset List Display; Storing And Recalling Broadcast Frequencies; Advanced Radio Operation - Pioneer Super Tuner IIID AVIC-N4 Operation Manual

4
To perform seek tuning, keep touching
or for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
Switching between the detail
information display and the pre-
set list display
You can switch the left side of the basic screen
according to your preference.
1
Touch "Preset" (or "Detail").
Each touch of "Preset" (or "Detail") changes
the detail information display or preset list dis-
play.
Detail information display
Preset list display
Storing and recalling broadcast
frequencies
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily store
up to six broadcast frequencies for later recall
with the touch of a key.
or you can
1
2

Advanced radio operation

(1) Function display
➲ How to display the Function menu ➞
Preset tuning keys (P1 — P6)
When you find a frequency that you want
to store in memory, keep touching a pre-
set tuning key P1 — P6 until the preset
number (e.g., P.CH 1) stops flashing.
The selected radio station frequency has been
stored in memory.
❒ Up to 18 FM stations, 6 for each of the
three FM bands, and 6 AM stations can be
stored in memory.
The next time you touch the same preset
tuning key P1 — P6, the radio station fre-
quency is recalled from memory.
❒ You can also use  and  to recall radio
stations frequencies assigned to preset
tuning keys P1 — P6.
(1)
Page 79 to 80
91