Panasonic Strada CN-NVD905U Operating Instructions Manual page 91

Adjust the Balance/Fader.
 Adjustment range: Balance ([Left]/[Right]):
Fader ([Front]/[Rear]):
Adjust the output level for each speaker.

Adjustment range: –12 dB – 0 dB – 12 dB
 Make the speaker from which the test signal (a buzzing sound) is audible at the lowest volume the reference, then
adjust other speakers so they are heard with the same speaker sound.
Input the distance to each speaker.
 Adjustment range:
0 cm – 500 cm
 When the distance is set, the
timing of sound output from
the other speakers is delayed to
match the speaker furthest from
the reference point.
(Approximately 0.3 ms per
10 cm)
Set the frequency.

Adjustment range: 60 Hz – 120 Hz – 200 Hz
Adjust the level for each frequency band.
 Adjustment range: –4 – 0 – 4
(–10 dB – ±0 dB – +10 dB)
Touch and hold the setting to register, from [EQ1] to [EQ5], for at least 2 seconds.
Note:
 Settings cannot be registered to [Flat].
 Touch and hold [Flat] for 2 seconds or more to return all settings to the defaults.
Select the settings to load, from [Flat] to [EQ5].
Settings
7 (Left) – 0 – 7 (Right)
7 (Front) – 0 – 7 (Rear)
Front R
Front L
120 cm
50 cm
Reference point
70 cm 130 cm
140 cm
Rear L Rear R
Subwoofer
 Set the listening position as the reference point.
 Measure the distance horizontally.
Measure this distance
Speaker
Reference point
91
91