Status Monitor; Task Bar Display - Panasonic UF-490 Software Manual
Document management system, printer and class 2 fax modem
Hide thumbs
Also See for UF-490:
- Service manual (284 pages) ,
- Operating instructions manual (121 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Status Monitor
Task Bar Display
The Status Monitor is a MFP utility that monitors and displays the current status of connected devices.
Upon activation of Windows, the icon of the status monitor appears on the System Tray.
The Status Monitor indicates the device status by icon lamp color as listed below.
NOTE
102
Lamp color
Status
Blue
Device is operational under standby, printing, copying status.
Yellow
Device inspection is required under initialization, paper supply, open cover,
paper jam, etc.
Red
Need for toner cartridge replacement, or device failure.
Gray
Device is in Engergy Saver (Sleep) Mode.
1.
If the power of the device is not turned on or the parallel cable is not connected when starting
Windows, the error message shown above appears.
Verify the power source and parallel cable and then press the
2. Connecting the device to a network server disables the status monitor.
3. UF-890/990 is not available with this feature.
Status Monitor
Retry
button.
Advertisement
Table of Contents
