Scheduled Recording - Panasonic Diga DMR-EZ27 Operating Instructions Manual

Scheduled Recording

Refer to "Advanced Scheduled Recording" (➔ 16) for detailed information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• RAM If the disc is protected, release protection (➔ 44).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit's display is set to the correct time.
• If connected via a cable box or satellite receiver, set channel on those
equipment before scheduled recording starts.
to select the DVD drive.
e, r to select "New Scheduled Recording", then
w, q to move through the items and e, r to set
the items.
Channel/Input – TV Station/External Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
– Hold button to change in 30-minute increments.
Mode – Recording mode
Name – Press [ENTER], see page 28.
– Repeat steps 3−5 to program other recordings.
when you have finished programming.
– "z" lights on the unit's display.
– Scheduled recording can be started only when the unit is turned off.
Channel, Caption
Preview of selected
channel
Schedule List Remaining Recording Time DVD 1:58 SP
3/26 Tue 12:53 PM
No Channel Date On Off Mode Check
New Scheduled Recording
Press ENTER to set new schedule.
ENTER
S SUB MENU CANCEL Timer Off A
SCHEDULED Remaining Recording Time DVD 1:58 SP
RECORDING 3/26 Tue 12:53 PM
Channel/ Date/
On Off Mode
Input Frequency
4-1 -------- --:-- -- --:-- -- --
Name
4-1 KPO-SD
Set Channel/Input.
ENTER --
Cancel 0 9 Number
Tips
• Icons such as " " indicate usable
RAM
discs. Refer to pages 62 and 63.
Notes
• Be sure to perform step 6 before the
scheduled recording time. When the
unit is turned off, "z" lights on the unit's
display to indicate scheduled recording
standby has been activated.
• "z" flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
• When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
• If two scheduled recording times
overlap, the first recording always has
priority. The second recording will start
only after the first recording has finished.
• When starting time for a scheduled
recording is the same, the recording that
you programmed later has priority.
• If you set DST (Daylight Saving Time)
to On when manually setting the clock,
scheduled recording may be affected
when summer time switches to winter
time and vice versa.
9
RQT8851