Step 1 Connection; Connecting A Television - Panasonic Diga DMR-EH57 Operating Instructions Manual

1
STEP Connection
Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
Using a 21-pin Scart cable
≥You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 18).
≥You can enjoy high-quality viewing by connecting the unit to an RGB compatible television (➡ 85).
[Required]setting] "AV1 Output" in the Setup menu (➡ 69)
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Select the connection pattern that matches your environment from pattern A–D. Confirm connections not listed below with your dealer.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off
[approx. 2 W (Power Save mode)]
When "Power Save" is set to "On", the "Quick Start" function does not work.
A

Connecting a television

To the aerial
Aerial
cable
RF coaxial
cable
1 2
2
(included)
RF coaxial
cable
(included)
B Connecting a television and VCR
To the aerial
2 4
RF coaxial cable
(included)
RF RF
IN IN
RF RF
OUT OUT
RF coaxial cable
2
1
Aerial cable
VHF/UHF
RF IN
[Required]setting]
"AV2 Input" and "AV2 Connection" settings in the Setup
RQT8896
menu (➡ 70)
14
Television's rear panel
VHF/UHF
AV
RF IN
3
RF RF
Y
IN IN
P
B
AV1
( TV )
P
RF RF OPTICAL R
OUT OUT
DIGITAL AL AUDIO OU DIGI UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT AV2 ( DECODER/EXT )
Television's rear panel
VHF/UHF
AV
RF IN
5
Y
P
B
AV1
( TV )
P R
OPTICAL
DIGITAL AL AUDIO OU DIGI UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT AV2 ( DECODER/EXT )
(included)
3
AV OUT
RF OUT
Connecting a terminal other
than the 21-pin Scart terminal
(➡ 16, 17)
Fully wired 21-pin
Scart cable
R-AUDIO-L VIDEO S VIDEO A A V OU V OUT T
Connecting a terminal other
than the 21-pin Scart
terminal (➡ 16, 17)
Fully wired 21-pin
Scart cable
R-AUDIO-L VIDEO S VIDEO A A V OU V OUT T
Connect the unit directly to the television
If you connect the unit through an AV selector
or video cassette recorder to the television,
21-pin Scart
video signal will be affected by copyright
cable
protection systems and the picture may not
be shown correctly.
VCR's
rear panel
≥When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if there are
both television and VCR input terminals.
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
Cooling fan
This unit's rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
Cooling fan
This unit's rear panel
4
AC IN
6
AC IN
DO NOT
Television
VCR
This unit