Panasonic Toughbook CF-19PJRFXAM Reference Manual page 119

Troubleshooting (Advanced)
Connecting Peripherals
You do not know the address map for
IRQ, I/O port address, etc.
The device connected to the serial port
does not work.
The Serial Port B of the port replicator
or the car mounter does not work.
Cannot print.
LAN transmission speed slows down
noticeably.
Poor performance during data trans-
mission via a PC Card (e.g., distorted
video image when writing to a DV
camera using an IEEE1394 PC Card).
<Only for model with wireless LAN>
Wireless LAN connection is cut.
You can check with the following procedure.
Click (Start) - [Computer] - [System properties] - [Device Manager].
A
A standard user needs to enter an administrator password.
Click [View] - [Resources by type].
B
Check the connection.
The device driver may not work. Refer to the instruction manual of the device.
Do not connect 2 mouse devices simultaneously.
Set [Touch Pad] to [Disabled] in the [Main] menu of the Setup Utility (
94).
Set [Serial Port A] or [Serial Port B] to [Auto] in the submenu of [Serial Port set-
tings] in the [Advanced] menu of the Setup Utility (
The I/O and IRQ you can use vary depending on the device. If the setting does
not work, try other settings in the Setup Utility.
Set [Serial Port B] to [Auto] in the submenu of [Serial Port settings] in the
[Advanced] menu of the Setup Utility (
Check the printer connection.
Turn on the printer.
The printer is not online.
No paper is in the printer tray or there is a paper jam.
Turn on the printer and connect it to the computer, and then restart the
computer.
Check the network connection if the printer is connected via network.
Try the following settings.
Click (Start) - [Control Panel] - [System and Maintenance] - [Power
Options], and select [High performance], then close the window.
119
page 96).
page 96).
page