Panasonic PT-LB2U Operating Instructions Manual page 25

Remote control operation (continued)
ENLARGE THE IMAGE
You can enlarge the projected image to the center
position by emphasizing within the range of 1× to 2×.
DIGITAL ZOOM
Press [RETURN] or [MENU] to escape.
[DIGITAL ZOOM] button operation
+ button: zooms in
- button: zooms out
Press "-"
(STANDARD)
Press "  " to shift the center point.
NOTE:
• When the
the POSITION menu is OFF,

• When the
the POSITION menu is ON,

• When another signal is input, the enlargement range is from
1× to 2× by 0.1.
• DIGITAL ZOOM
changed.
• During
[DEFAULT], [INDEX-WINDOW] and [FUNCTION] (except
when AV MUTE is assigned) buttons are not available.
• The image is distorted momentarily when the image is
zoomed.
USE AN ASSIGNED FUNCTION
You can select a useful function from the list and assign
it to [FUNCTION] button as a shortcut.
FUNCTION
Press "+"
(MAXIMUM)
To display the on-
screen menu (main
menu, sub-menu or
detailed menu).
For the menu
operation, see
"OPERATE THE
MENU". (  page 26)
When not using the [FUNCTION] button
1
Select DISABLE in FUNCTION BUTTON
(PROJECTOR SETUP menu).
2
Press [ENTER].
3
Select OK.
(Operation during
zoom mode)
4
Press [ENTER].
NOTE:
• For details,
SETUP menu. (
COMPUTER signal is input, if FRAME LOCK in
enlargement range is 1× to 3×.
COMPUTER signal is input, if FRAME LOCK in
enlargement range is 1× to 2×.
mode is canceled when the input signal is
DIGITAL ZOOM mode, [AUTO SETUP], [FREEZE],
MENU
see FUNCTION BUTTON in PROJECTOR
page 38)

FUNCTION
Press and hold for
at least 3 seconds.
ENGLISH  25