Table of Contents
Advertisement
8
AI-Control
Adjusts brightness of displays when using MULTI DISPLAY.
Note:
If you set AI-SYNCHRONIZATION to ON, the following menus will be unavailable and these settings will be fi xed to the
initial values.
PICTURE menu: COLOR, TINT
9
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
Switch
to
2
Press the
button on the remote control.
3
Press one of
-
4
Press one of
-
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number
for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 46)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not
the same as the ID select number (see page 46).
Press to select AI-Control.
Press to select "OFF" , "ON".
The brightness depends on
each display's setting.
OFF
Press twice to exit from SET UP.
on the right side.
,
for the tens digit setting.
,
for the units digit setting.
SET UP for MULTI DISPLAY
Equalize the brightness of
all the displays.
ON
button.
,
MULTI DISPLAY SETUP
MULTI DISPLAY SETUP
ON
HORIZONTAL SCALE
× 2
VERTICAL SCALE
× 2
SEAM HIDES VIDEO
OFF
LOCATION
A1
AI-SYNCHRONIZATION
OFF
,
buttons at the same time.)
37
Hide quick links:
Advertisement
Table of Contents
