[Rotate Disp.]/[Rotate] To Display The Picture Rotated - Panasonic Lumix DMC-TZ1 Operating Instructions Manual

Panasonic lumix dmc-tz1: operating instruction
Table of Contents

Advertisement

[ROTATE DISP.]/[ROTATE]
To display the picture rotated
MENU
Press [
] to display the [PLAY] mode
SET
menu and select the item to set. (P80)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display
(The picture is automatically rotated
and displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
PLAY
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DPOF PRINT
SELECT
• The pictures are displayed without
being rotated when you select [OFF].
• Refer to P34 for information about how
to play back pictures.
2 Press [MENU/SET] to close the
menu.
∫ Rotate
(The picture is rotated manually.)
1 Press 2 1 to select the picture
and then press 4.
ROTATE
SELECT
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Motion pictures and protected pictures
cannot be rotated.
1
/
3
OFF
OFF
ON
ON
MENU
SET
MENU
SET
100 _ 0001
1/3
MENU
SET
EXIT
2 Press 3 4 to select the direction
to rotate the picture and then
press [MENU/SET].
ROTATE
CANCEL
The picture rotates clockwise in
steps of 90°.
The picture rotates
counter-clockwise in steps of 90°.
3 Press [MENU/SET] twice to close
the menu.
∫ Example
When rotating clockwise (
Original
picture
• When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated).
• If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P26)
• The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
• When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
Menu Settings
MENU
SELECT
SET
MENU
SET
)
VQT0V40
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-tz1kDmc-tz1sDmc-tz1

Table of Contents