Panasonic Lumix DMC-TZ1 Operating Instructions Manual page 62

Advanced
• If you are setting the home area for the
second time etc., the screen returns to the
screen shown in step
[MENU/SET] to set your home area.
Press [MENU/SET] again to close the
menu.
∫ Setting the travel destination area
1
(Perform steps
1 Press 3/4 to select [DESTINATION]
and then press [MENU/SET] to set.
WORLD TIME
--:-- --. --.----
CANCEL
A: Depending on the setting, the time at
the travel destination area or the home
area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
2 Press 2/1 to select the area the travel
destination is in and then press [MENU/
SET] to set.
10:00
Seoul
Tokyo
+14:00
SELECT
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time difference
from the home area is displayed at the
bottom left of the screen.
• If daylight saving time [
home area, press 3. (The time advances
by one hour.) Press 3 again to return to
the original time.
• The names of major cities in the selected
area are displayed. Also, the time
difference between the selected area and
62
VQT0V40
3
after you press
2 3
, and .)
DESTINATION
HOME
MENU
MENU
SELECT SET
SET
0:00
MENU
CANCEL
SET
MENU
SET
] is used at the
the home area is displayed on the bottom
left of the screen. (Refer to P63 for
information about the names of the major
cities that are displayed.)
3 Press [MENU/SET] to close the menu.
SETUP
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
AUTO REVIEW
SELECT
• The icon changes from [
setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing steps
1 2 3
and then steps 1 and 2 of
, ,
"Setting the home area [HOME]".
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
• The [WORLD TIME] setting also affects
simple mode [
/
1
4
MENU
n
0
SET
OFF
1SEC.
MENU
EXIT
] to [
].
] after