Panasonic Lumix DMC-FX580 Operating Instructions Manual page 26

Preparation
v [NO.RESET]
• The folder number is updated and the file number starts from 0001. (P105)
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting the
card (P27) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
w [RESET]
• When the [RESET] setting is selected during recording, the operation that resets the lens is also
performed at the same time. You will hear the sound of the lens operating but this is normal and not
indicative of malfunctioning.
• When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will be also reset, too.
• When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[ROTATE DISP.] (P100) in [PLAYBACK] Mode menu is set to [ON].
– The birthday and name settings for [BABY1]/[BABY2] (P60) and [PET] (P61) in Scene Mode.
– The settings of [TRAVEL DATE] (P70) (departure date, return date, location)
– The [WORLD TIME] (P72) setting.
• The folder number and the clock setting are not changed.
x [USB MODE]
• When [PC] is selected, the camera is connected via the "USB Mass Storage" communication system.
• When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
[TV ASPECT]
• This will work when the AV cable is connected.
[TOUCH GUIDE]
[VERSION DISP.]
26
VQT1Y62
Reset the file number of the next recording to 0001.
The [REC] or [SETUP] menu settings are reset to the initial settings.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection cable
(supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the camera
to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the type of TV.
(Playback Mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
Set the guide screen including Touch AF/AE or Touch Zoom,
choosing whether or not to display it.
[OFF]/[ON]
It is possible to check which version of
firmware is on the camera.