Powering Off The Projector; Warning Indicator - Optoma TW766W User Manual

Installation
Contact the

nearest service
center if the
projector displays
these symptoms.
See pages
64-65 for more
information.
6
English

Powering Off the Projector

. Press the " " button to turn off the projector lamp. The
following message will be displayed on the screen.
Press the " " button again to confirm the shut down. If
the button is not pressed, the message will disappear in 5
seconds.
2. The cooling fans continue to operate for about 0 seconds
for cooling cycle. When the Power LED turns Red, the
projector has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press " " button to restart the projector.
3. Disconnect the power cord from the electrical outlet and
the projector.
4. Do not turn on the projector immediately following a power
off procedure.

Warning Indicator

When the "LAMP" indicator lights red, the projector will

automatically shut down. Please contact your nearest
service center for assistance.
When the "TEMP" indicator lights red, it indicates the

projector has overheated. The projector will shut down
automatically.
Under normal conditions, the projector can be switched on
again after it has cooled down.
When the "TEMP" indicator flashes red, it indicates the fan

has failed.