Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.
Control Panel
Using the Control Panel
POWER
MENU
RE-SYNC
SOURCE
Four Directional
Select Keys
Keystone
Lamp LED
Temp LED
Power LED Indicates the projector's status.
User Controls
Refer to the "Power On/Off the Projector" section on
pages 3-4.
Press "MENU" to launch the on-screen display
(OSD) menu. To exit OSD, Press "MENU" again.
Confi rm your item selection.
Automatically synchronize the projector to the input
source.
Press "SOURCE" to select an input signal.
Use
to select items or make adjustments
to your selection.
Use
to adjust image distortion caused
by tilting the projector. (
Indicates the projector's lamp status.
Indicates the projector's temperature status.
±40 degrees)
7
English