Memory Gauge; Battery Check - Olympus CAMEDIA C-300 Zoom Basic Manual

Memory gauge

The memory gauge lights up when you take a picture. While the gauge is lit,
the camera is storing the picture on the card. The memory gauge indication
changes as shown below depending on the shooting status. When the
memory gauge is full, wait a few moments before taking the next shot.
When taking still pictures
En
Before
shooting
(Gauge is off)
When recording movies
Before shooting
(Gauge is off)

Battery check

If the remaining battery power is low, the battery check indication on the
monitor changes as follows while the camera is turned on.
Lights up (Green)
Remaining power
level: high
8 En
Shoot
One picture
taken
(Lit)
If you continue shooting
Shoot
Wait
During shooting (Lit)
• Shooting is not possible until the lit area goes off
completely.
• Movie recording ends automatically when the memory
gauge is full.
Lights up (Red)
Remaining power level: low
Replace with a new battery.
Shoot
More than
two taken
(Lit)
Remaining power level:
exhausted
Replace with a new battery.
Shoot
Wait
No more
pictures can be
taken (Fully Lit)
No indication
Green lamp and orange
lamp on the right of the
viewfinder blink