Nokia 9290 User Manual page 286

268
Tip: If you have to give
away your Communicator,
it is a good idea to format
the device and restore the
factory-installed software
from the CD-ROM. This way
the next user will be able to
start with a fresh device.
1 Disconnect the charger and remove the battery to restart the communicator.
2 Insert the battery and open the cover.
3 When you see the Nokia 9290 Communicator Welcome screen, immediately
press and hold down the Ctrl+Shift+F keys. The F key should be pressed last.
4 Formatting starts. It takes at least two minutes to complete.
5 With Windows Explorer, locate the All_Nokia_9290_data.sis installation
package in the Preinstalled in device folder of the sales package CD-ROM
and install it.