Nokia 9290 User Manual page 266

248
Tip: To use High Speed
connection, your GSM
operator must activate
High Speed Data
Services on your
SIM card.
Install fax modem driver using cable connection
1 Start Windows.
2 Insert the Nokia 9290 CD-ROM into the CD-ROM drive of the computer and
locate the modem information file (mdmn9290.INF). Alternatively, you can find
the file on the www.forum.nokia.com Web site.
3 Double-click the Modems icon in the Windows Control Panel. A dialog opens.
If no modem drivers have been installed on the computer before, continue with
step 6.
4 Click the Add button.
5 In the field What type of modem do you want to install? select Other. Click Next.
6 Select the option Don't detect my modem; I will select it from a list.
7 Click Have disk...
8 Click Browse and locate the CD-ROM drive with the Nokia 9290 CD-ROM.
9 On the CD-ROM, locate a folder Software for PC/Modem drivers.
10 In the Modem drivers folder, select Mdmn9290.inf file and click Open or OK.
11 In the Install from disk dialog, Click OK.
12 In the Install New Modem dialog, select Nokia 9290 Communicator (Cable). If
you are using High Speed connection (HSCSD), select a speed higher than 9600
bps and cable connection. Click Next.
13 Select the COM port where the serial cable is connected. Click Next.
14 Click Finish.
15 Remove the CD-ROM from the drive.