Bracketing - Nikon D5100 Reference Manual

Bracketing

Bracketing automatically varies exposure, white balance, or Active D-Lighting (ADL)
slightly with each shot, "bracketing" the current value. Choose in situations in which
it is difficult to set exposure, white balance, or Active D-Lighting and there is not time
to check results and adjust settings with each shot, or to experiment with different
settings for the same subject.
Option
Vary exposure over a series of three photographs.
AE
k
bracketing
Each time the shutter is released, the camera creates three images, each with a
WB
m
t
bracketing different white balance. Not available with image qualities of NEF (RAW).
ADL Take one photo with Active D-Lighting off, and another at the current Active
!
D-Lighting setting.
bracketing
1
Choose a bracketing option.
After pressing G to display the menus,
highlight Custom Setting e2 (Auto
bracketing set) and press 2.
The options shown at right will be displayed.
Highlight the desired bracketing type and
press J.
2
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the P button.
Press the P button again to place the cursor in the information display.
88
Shot 1: unmodified
Information display
Description
Shot 2: exposure reduced Shot 3: exposure increased
G button
P button