Error Messages - Nikon CoolPix S6200 Reference Manual

Error Messages

Display
O (blinks)
N
Battery exhausted.
P
Battery temperature
high
Q (● blinks red)
P
Please wait for the
camera to finish
recording.
u
Memory card is write
protected.
P
This card cannot be
used.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
Yes
No
Problem
Clock not set.
Battery exhausted.
Battery temperature is
high.
Camera cannot focus.
Camera cannot perform
other operations until
saving is complete.
Write-protect switch is
in "lock" position.
Error accessing memory
card.
Memory card has not
been formatted for use
in COOLPIX S6200.
Solution
Set date and time.
Charge or replace battery.
Turn off camera, and allow
battery to cool down before
resuming use. After five
seconds, this message will
disappear, the monitor will
turn off, and the power-on
lamp will blink rapidly. After
the lamp blinks for three
minutes, the camera will turn
off automatically. Pressing the
power switch also turns off
the camera.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when saving is complete.
Slide write-protect switch to
"write" position.
• Use approved card.
• Check that terminals are
clean.
• Confirm that memory card
is correctly inserted.
Formatting deletes all data
saved on the memory card. Be
sure to select No and make
copies of any images which
need to be kept before
formatting the memory card.
Select Yes and press the k
button to format the memory
card.
A
E55
14, 16
21
28, 29
70
–
–
19
18
18
F5
E79