Nikon CoolPix P7100 Reference Manual page 236

Error Messages
Display
N
My Menu can not be
changed at current
settings.
N
Raise the flash.
P
Speedlight setting error
Lens error
Q
P
Communications error
System error
Q
Q
Initializing lens. Cannot
focus.
E110
Description
All registered menu
items cannot be
changed at the
current setting.
The flash is lowered
when the scene mode
is Night portrait or
Backlighting with
HDR set to Off or the
Continuous mode is
Continuous flash.
The flash is not raised
during the scene auto
selector.
Group A has not been
selected for group
setting when
shooting using
wireless multiple flash-
unit photography.
Lens is not operating
properly.
Error occurred during
communication with
printer.
Error has occurred in
camera's internal
circuitry.
The camera cannot
focus.
Solution
• Check the settings of functions
that are not registered in My Menu.
• Change the menu item to be
registered in My Menu.
Press the K (flash pop-up) button
to raise the flash.
Press the K (flash pop-up) button
to raise the flash. The camera can still
shoot normally with the flash
lowered if you do not wish to use it.
Set the group setting of the master
commander and remote flash unit to
Group A.
Turn camera off and then on again. If
error persists, contact retailer or
Nikon-authorized service
representative.
Turn off camera and reconnect cable. E23
Turn off camera, remove and reinsert
battery, and turn on camera. If the
error persists, contact retailer or
Nikon-authorized service
representative.
Wait until the camera recovers
automatically.
A
E90
E90
41,
44,
61,
E45
40, 61
E102
25
25
–