NEC NP901W User Manual page 128

Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the same single remote control. To do so,
you have to assign an ID number to each projector.
CONTROL ID NUMBER .......Select a number from 1 to 254 you wish to assign to your projector.
CONTROL ID .......................Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID set-
NOTE:
• If you select [ON] for [CONTROL ID], you cannot operate the projector from the remote control with a different CONTROL ID.
The buttons on the projector cabinet can be used. Neither can you operate the projector by using the optional remote control
NP01RC that does not has the CONTROL ID function.
• Your setting will not be affected even when [RESET] is done from the menu.
Using the Remote Control to change IDs
1. Press the ID SET button on the remote control.
the COntrOl id screen will be displayed.
If the projector can be operated with the current remote control ID, the [ACTIVE] will
be displayed. If the projector cannot be operated with the current remote control ID, the
[INACTIVE] will be displayed. To operate the inactive projector, assign the ID by using
the following procedure (Step 2).
2. Press one of 0 to 9 buttons while pressing and holding the ID SET button on the
remote control.
the range of ids is from 1 to 254.
To clear the ID:
Press the CLEAR button while pressing the ID SET button.
NOTE:
• Setting "0 (zero)" means to clear the ID.
• You cannot operate the projector using the remote control if the remote ID is not the same as
the projector ID.
• No ID means that all the projectors can be operated together with a single remote control. To
set "No ID", enter "000" or press the CLEAR button.
3. Release the ID SET button.
the updated COntrOl id screen will be displayed.
NOTE: The IDs can be cleared in a few days after the batteries are run down or removed.
ting.
114
6. Using On-Screen Menu
OFF
POWER
COMPUTER
1 2
VIDEO S-VIDEO COMPONENT
VIEWER NETWORK
1 2
4 5
7 8
0
ID
MENU
ENTER
L-CLICK
VOLUME MAGNIFY
PICTURE LAMP MODE
AV-MUTE 3D REFORM
ID SET LENS SHIFT
ID
OFF
POWER
COMPUTER
1 2
VIDEO S-VIDEO COMPONENT
VIEWER NETWORK
1 2
4 5
7 8
0
ID
MENU
ENTER
L-CLICK
VOLUME MAGNIFY
PICTURE LAMP MODE
AV-MUTE 3D REFORM
ID SET LENS SHIFT
ID
ON
AUTO ADJ.
3
HDMI
PIP
3
6
9
CLEAR
EXIT
R-CLICK
PAGE
UP
DOWN
ASPECT
FREEZE
FOCUS
/ZOOM HELP
ON
AUTO ADJ.
3
HDMI
PIP
3
6
9
CLEAR
EXIT
R-CLICK
PAGE
UP
DOWN
ASPECT
FREEZE
FOCUS
/ZOOM HELP