NEC NP901W User Manual page 116

[WIRED]
PROFILES (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the ENTER button.
DHCP:
Enabling this option automatically assigns an IP address to the projector from your DHCP server.
Disabling this option allows you to register the IP address or subnet mask number obtained from your network
administrator.
IP ADDRESS .......... Set your IP address. Press
SUBNET MASK ...... Set your subnet mask number. Press
GATEWAY .............. Set the default gateway of the network connected to the projector. Press
and type in 12 numeric characters.
DNS CONFIGURATION .. Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters
are used.
RECONNECT .......... Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].
to display the software keyboard and type in 12 numeric characters.
to display the software keyboard and type in 12 numeric characters.
102
6. Using On-Screen Menu
to display the software keyboard