NEC VT800 User Manual page 119

Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the same single remote control. To do so,
you have to assign an ID number to each projector.
CONTROL ID NUMBER ......Select a number from 1 to 254 you wish to assign to your projector.
CONTROL ID ......................Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID
NOTE:
• If you select [ON] for [CONTROL ID], you cannot operate the projector from the remote control with a different CONTROL ID.
The buttons on the projector cabinet can be used. Neither can you operate the projector by using the optional remote control
NP01RC that does not has the CONTROL ID function.
• Your setting will not be affected even when [RESET] is done from the menu.
Using the Remote Control to change IDs
1. Press the ID SET button on the remote control.
The CONTROL ID screen will be displayed.
If the projector can be operated with the current remote control ID, the [ACTIVE] will
be displayed. If the projector cannot be operated with the current remote control ID,
the [INACTIVE] will be displayed. To operate the inactive projector, assign the ID by
using the following procedure (Step 2).
2. Press one of 0 to 9 buttons while pressing and holding the ID SET button on the
remote control.
The range of IDs is from 1 to 254.
To clear the ID:
Press the CLEAR button while pressing the ID SET button.
NOTE:
• Setting "0 (zero)" means to clear the ID.
• You cannot operate the projector using the remote control if the remote ID is not the same as
the projector ID.
• No ID means that all the projectors can be operated together with a single remote control. To
set "No ID", enter "000" or press the CLEAR button.
3. Release the ID SET button.
The updated CONTROL ID screen will be displayed.
NOTE: The IDs can be cleared for a few days after the batteries are run down or removed.
setting.
107
6. Using On-Screen Menu
ENTER
L-CLICK R-CLICK
VOLUME MAGNIFY PAGE
UP
DOWN
PICTURE LAMP MODE ASPECT
AV-MUTE 3D REFORM FREEZE
FOCUS
ID SET LENS SHIFT /ZOOM HELP
ID
OFF ON
POWER
COMPUTER AUTO ADJ.
1 2 3
VIDEO S-VIDEO COMPONENT HDMI
VIEWER NETWORK PIP
1 2 3
4 5 6
7 8 9
0
CLEAR
ID
MENU EXIT
ENTER
L-CLICK R-CLICK
VOLUME MAGNIFY PAGE
UP
DOWN
PICTURE LAMP MODE ASPECT
AV-MUTE 3D REFORM FREEZE
FOCUS
ID SET LENS SHIFT /ZOOM HELP
ID