NEC NP2150 User Manual page 94

[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGhTNESS]
Adjusts the brightness level or the back raster intensity.
[ShARpNESS]
Controls the detail of the image for Video.
NOTE: Although the use of the SHARPNESS control will provide a sharper or softer picture, the actual change may not be dra-
matic, depending on the resolution of an input signal.
[COLOR]
Increases or decreases the color saturation level (not valid for RGB and digital signals).
[hUE]
Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for
Video, Component and TV standard inputs (not valid for RGB and digital signals).
Input signal
Computer (RGB analog)
Computer (RGB digital)
Component
Video, S-Video
Viewer, Network
Yes=Adjustable, No=Not adjustable
[RESET]
The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following;
Preset numbers and [REFERENCE] within the [DETAIL SETTINGS] screen when [STANDARD] is selected in [MODE].
The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently select-
ed will not be reset.
Contrast Brightness
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
80
6. Using On-Screen Menu
Sharpness Color
Yes No
Yes No
Yes Yes
Yes Yes
No No
Hue
No
No
Yes
Yes
No