NEC NP2150 User Manual page 103

Using Off Timer [OFF TImER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN
3 MINUTES] message will be displayed on the bottom of the screen.
[TOOLS]
Using [CORNERSTONE]
(→ page 39)
Using [ENTRY LIST]
(→ page 76)
Setting the Current Date and Time [DATE, TImE, pRESET]
You can set the current time, month, date, and year.
NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the
main power is off for 2 weeks or more, the built-in clock will cease. If the built-in clock ceases, set the date and time again. The
built-in clock will not cease while in the standby mode.
TIME ZONE: Select your time zone.
DAYLIGHT SAVING TIME: Place a check mark to adjust the clock for daylight saving changes.
INTERNET TIME SERVER: Place a check mark to turn on clock synchronization. When this option is turned on, the
projector's built-in clock will be synchronized with an Internet timer server in every 24 hours and at the time of pro-
jector's start up.
UPDATE button: Synchronizes the projector's built-in clock immediately.
The UPDATE button is not available unless the INTERNET TIME SERVER check box is turned on.
Setting mouse pointer, Button and Sensitivity [mOUSE]
This option lets you to change your USB mouse settings. The mouse settings feature is available for USB mouse
only. Choose the settings you want:
MOUSE.BUTTON.... [RIGHT.HAND].or.[LEFT.HAND]
MOUSE.SENSITIVITy. . . [FAST],.[MEDIUM].or.[SLOW]
Using [hELp]
(→ page 35)
89
6. Using On-Screen Menu