Connecting Speakers - Aiwa AV-S17 Operating Instructions Manual

1 and 2 in the illustration correspond to the following details.
2
AM antenna
1
Sub woofer

CONNECTING SPEAKERS1

Speaker terminals
Connect front speakers (system A and/or B) and sub woofer to
the corresponding speaker terminals on the unit:
- the front speaker cords to the SPEAKERS terminals
- for more powerful bass, the sub woofer (with a built-in amplifier)
cord to the SUB WOOFER 3 jack
Speaker impedance
For all speakers, use speakers of 8 ohms or more.
Connecting + to +, – to – terminals
To get the proper sound effect, the speaker terminals on the unit
and the speaker should be connected with proper polarity; the +
terminal on the unit should be connected to the + terminal on
the speaker (and – to –).
NOTE
• The sub woofer sound will be output only when the speaker
system A (the front speakers connected to the SPEAKERS A
terminals) is selected.
• Be sure to connect the speaker cords correctly as shown in
the illustration on the right column. Improper connections can
cause short circuits in the SPEAKERS terminals.
• Do not leave objects generating magnetism near the speakers.
2
FM antenna
Lift up the terminal flap, insert the speaker cord lead
into the terminal slot, then close the flap. Check that
the cord is connected securely.
1 1
Speaker system A Speaker system B
Right Left Right Left
En En En En En
E E E E E
(Españo (Españo
(Españo (Españo (Españo
F F F F F
(França (França
(França (França (França
4
ENGLISH