MSI MEGA BOOK S260 User Manual page 84

When the Supervisor Password is set, the new item User Access
Level and Password Check will be added in the menu. You can
make further settings of access right in the User Access Level item.
Setting options: No Access, View Only, Limited and Full Access.
The Password Check item is used to specify the type of BIOS
password protection that is implemented. Settings are described
below:
Setup The password prompt appears only when end users try to
run Setup.
Always A password prompt appears every time when the computer
is powered on or when end users try to run Setup.
To clear a set password, just press [Enter] when you are prompted
to enter the password. A message box will show up confirming the
password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup without entering any
password.
About Supervisor Password and User Password
Supervisor Password allows the user to enter and change
the settings of the setup menu; User Password only allows
the user to enter the setup menu, but do not have the right
to make changes.
Things to know...
68