MSI MEGA MPC 51PV User Manual page 44

M S-6408 Barebone
software both support Ultra DMA/33, Ultra DMA/66, Ultra DMA/100 and Ultra
DMA/133, select [Auto] to enable BIOS support.
HDD DM A transfer access
Setting to [Enabled] will open DMA bus master and execute DMA action in DOS, which
will make the data transferring faster.
HDD Block M ode
Block mode is also called block transfer, multiple commands, or multiple sector read/
write. If your IDE hard drive supports block mode (most new drives do), select
[Enabled] for automatic detection of the optimal number of block read/writes per
sector the drive can support.
HDD S.M.A.R.T. Capability
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting
Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your disk
status to predict hard disk failure. This gives you an opportunity to move data from a
hard disk that is going to fail to a safe place before the hard disk becomes offline.
Settings: [Auto], [Enabled], [Disabled].
System Information
Press <Enter> to for the sub-menu of each item:
M arket Name/M odel Name
The two items show the information of your system (read only).
BIOS Version
This item shows the BIOS version of your system (read only).
CPU Type/CPU Frequency/Total Memory
The three items show the CPU related information of your system (read only).
3-8