Using Easy Guider: Record; Using Easy Guider: Timer Recordg - LiteOn DD-A100X User Manual

Using Easy Guider: Record

Before you start...
• Choose a recordable disc with enough space.
Check the disc types supported by the DVD recorder
you are using.
Model Comparison Chart (back cover)
Discs Types Supported (p.6)
• Complete the channel scanning process for your TV.
Setting TV Channels (p.18)
..........................................................................................
1.
On the Easy Guider menu, press  to select
'Record', then press ENTER.
EasyAccess_EasyGuider_03_01
2. Press  to select the signal source on which the
program you would like to record is being broadcast or
played, then press ENTER.
If you select 'TV', press  to select the channel
you want to record, then press ENTER.
3. Press  to select a recording mode, then press
ENTER.
Recording Mode (p.46)
4. Press  to select 'Go', then press ENTER.
Recording will then start.
5. Press PAUSE/STEP to pause recording
Press PAUSE/STEP again to resume recording.
Press  STOP to stop recording.
Using Easy Guider: Timer
Recordg
Normal Timer Recording
Before you start...
• Refer to 'Using Easy Guider: Record'.
..........................................................................................
1. On the Easy Guider menu, press  to select 'Timer
Record', then press ENTER.
EasyAccess_EasyGuider_04_01
2. Press  to select 'Date/Time Setting', then press
ENTER.
EasyAccess_EasyGuider_04_02
This screen will not be displayed, if your DVD recorder does not
feature the VCR Plus+ system support.
3. Press  to select the signal source on which the
program you would like to record is being broadcast or
played, then press ENTER.
If you select 'TV', press  to select the channel
you want to record, then press ENTER.
4. Press  to select a recording frequency, then press
ENTER.
5. Press  to select a recording mode, then press
ENTER.
Recording Mode (p.46)
6. Set the date, start time and end time one by one. Press
 or number buttons (0-9) to insert number,
and press ENTER to confirm your input before going
to next setting.
7. The Timer Program information will appear. Press
ENTER to exit the Timer Record setting.
24