Chapter 1 Introduction; Overview - LXE MX7 Reference Manual

Microsoft windows ce 5.0 equipped
Hide thumbs Also See for MX7:
Table of Contents

Advertisement

Overview

The LXE® MX7 is a rugged, portable, hand-held Microsoft® Windows® CE 5.0 equipped
mobile computer capable of wireless data communications.
The mobile device can transmit information using an
802.11 network card and it can store information for later
transmission through an RS-232 or USB port.
The mobile device is vertically oriented and features
backlighting for the display. The touchscreen display
supports graphic features and Windows icons that the
Windows CE 5.0 operating system supports. Keypads are
available in 55-key alphanumeric and 32-key numeric-alpha
versions. Also available is an IBM 5250 55-key keypad
overlay.
This device is a Windows CE 5.0 compatible computer that
can be scaled from a limited function batch computer to an
integrated RF scanning computer. The MX7 Cold Storage
(MX7CS) mobile device functions normally in various
temperature ranges. A trigger handle is available as an
accessory.
The attached stylus is used to assist in entering data and
configuring the mobile device. Protective film for the touchscreen is available as an accessory.
The MX7 is powered by a 2200 mAh Lithium-Ion main battery pack and an internal NiCd backup
battery. The MX7 Bluetooth® module supports LXE Bluetooth printers and scanners.
If the mobile device has AppLock installed, please refer to "Chapter 6 – AppLock" for setup and
Wireless configuration and security parameters are described in detail in "Chapter 5 – Wireless
Related Manuals
Integrated Scanner Programming Guide – contains programming barcodes used when setting
up integrated scan engines.
SE824, SE955 and SE1524 scanner barcode reading parameters, refer to Chapter 2 in the
"Integrated Scanner Programming Guide". Note: The SE955 scanner replaced the SE824
scanner on all MX7's manufactured after July 2006.
Intermec EV15 linear imager, refer to Chapter 3 in the "Integrated Scanner Programming
Guide".
HHP 5380SF 2D imager, refer to Chapter 4 in the "Integrated Scanner Programming
Guide".
MX7 Multicharger User's Guide – contains user, technical and troubleshooting information for
the MX7 battery multi-charger.
MX7 Cradle Reference Guide – contains user, technical and troubleshooting information for the
MX7 Cradles.
E-EQ-MX7RG-H

Chapter 1 Introduction

processing information.
Network Configuration".
MX7 Reference Guide

Advertisement

Table of Contents
loading

Table of Contents