LG 37LP1D Owner's Manual page 17

When connecting with a component cable
TV Back
DIGITAL AUDIO
(OPTICAL)
OUTPUT
RS-232C INPUT
DVI
(CONTROL/SERVICE)
INPUT
RGB INPUT
COMPONENT1
(PC/DTV INPUT) INPUT
2-2
Select or , depending on your available
2-1 2-2
DVD connector.
AUDIO (MONO)
R L VIDEO
MONITOR
S-VIDEO
OUT
AV1
COMPONENT1
R L
AUDIO INPUT VIDEO INPUT
1
2-1
(R) AUDIO (L) B
R
DVD
Connect the video outputs (Y, P
1
to the COMPONENT1 VIDEO INPUT jacks on the
set.
Connect the audio outputs of the DVD to the
2-1
COMPONENT1 AUDIO INPUT jacks on the set.
Connect the optical audio output of the DVD to
2-2
the DIGITAL AUDIO COMPONENT1 INPUT jack
on the set.
3 Turn on the DVD player, insert a DVD.
Select Component 1 input source with using the
4
INPUT button on the remote control.
- If connected to COMPONENT2 input, select
Component 2 input source.
Refer to the DVD player's manual for operating
5
instructions.
• Component Input ports
To get better picture quality, connect a DVD player
to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
• Digital Audio will not work for Component 2 input
source.
• Digital Audio operation has priority if Digital Audio
and AUDIO L/R are connected at the same time.
Installation
, P ) of the DVD
R
B
P
Y P
R
B
Pr
Y Pb
R-Y
Y B-Y
Y Cb Cr
Y P P
B R
17