LG 37LP1D Owner's Manual page 14

Installation
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used;
the fixed images on the sides of the screen may remain visible on the screen.
When connecting with an antenna
TV Back
AUDIO (MONO)
R L VIDEO
MONITOR
S-VIDEO
OUT
AV1
COMPONENT1
R L
AUDIO INPUT VIDEO INPUT
When connecting with an RCA cable
AUDIO
R
S-VIDEO
COMPONENT1
R L
AUDIO INPUT VIDEO INPUT
ANT IN
S-VIDEO OUT
ANT OUT
(R) AUDIO (L) VIDEO
IN
When connecting with an S-Video cable
S-VIDEO
COMPONENT1
R L
AUDIO INPUT
1
ANT IN
S-VIDEO OUT
ANT OUT
IN
14
2
ANT IN
HDMI/DVI
ANT OUT S-VIDEO
OUT
VCR
1
Antenna
(MONO)
L VIDEO
MONITOR
OUT
AV1
TV Back
1
VCR
AUDIO (MONO) VIDEO
R L
TV Back
MONITOR
OUT
AV1
VIDEO INPUT
2
(R) AUDIO (L) VIDEO
VCR
VCR Setup
Connect the RF out socket of the VCR to the
1
Antenna socket on the set.
Connect the antenna cable to the RF antenna
2
socket of the VCR.
(R) AUDIO (L) VIDEO
IN
Press the PLAY button on the VCR and match the
3
appropriate programme between the TV and VCR
for viewing.
Connect the AUDIO/VIDEO jacks between TV
1
and VCR. Match the jack colours (Video = yellow,
Audio Left = white, and Audio Right = red).
Insert a video tape into the VCR and press PLAY
2
on the VCR. (Refer to the VCR owner's manual.)
Select AV1 input source with using the INPUT
3
button on the remote control.
- If connected to AV2 input, select AV2 input
source.
Connect the S-VIDEO output of the VCR to the S-
1
VIDEO input on the set. The picture quality is improved;
compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO
2
INPUT jacks on the set.
Insert a video tape into the VCR and press PLAY on
3
the VCR. (Refer to the VCR owner's manual.)
Select AV1 input source with using the INPUT button
4
on the remote control.
- If connected to AV2 input, select AV 2 input source.
Do not connect to both Video and S-Video at
the same time. In the event that you connect
both Video and the S-Video cables, only the
S-Video will work.