Table of Contents
Advertisement
Connecting to External Devices
1.
4
Press Power.
2.
Turn on the PC.
Select an input signal.
5
Press INPUT on the remote control to select the input signal.
INPUT → ◄ ► → OK
Or, press SOURCE on the bottom of the set.
SOURCE →◄ ► → AUTO/SET
A.
Connecting with a D-Sub Signal Input Cable.
Select RGB: 15-pin D-Sub analog signal.
Input List
AV
B.
Connecting with an HDMI to DVI Signal Input Cable.
Select HDMI/DVI: DVI Digital signal or HDMI Digital signal.
Input List
AV
•
Connecting two computers.
Note
Connect the signal cables (HDMI-DVI and D-Sub) to each computer.
Press INPUT on the remote control to select the computer to use.
•
Connect to a grounded power outlet directly on the wall or on a grounded power strip.
Component
RGB
HDMI/DVI
Component
RGB
HDMI/DVI
11
Power button
SuperSign
SuperSign
Hide quick links:
Advertisement
Table of Contents
