Kyocera KM-C4008 Operation Manual page 177

Default copy limit
Perform the following procedure when you want to change the
default copy limit for new department ID-codes.
1
Select "Def. Val. of coun. limit" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
The "Def. Val. of coun. limit" screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Scanner Managem. On
Fax Management On
Excess of limit Setting Unable to us
Def. Val. of coun. limit 999999
Total size 1 8
Total size 2 11"x17" No specif.
Total size 3 8
Default setting - Management - Managem. Def. set.
Metric specifications
Managem. Def. Set.
Setting item
Scanner Managem. On
Fax Management On
Excess of limit Setting You cannot u
Def. Val. of coun. Limit 999999
Total size 1 A3 No specif.
Total size 2 A4 No specif.
Total size 3 B4 No specif.
Default setting - Management - Managem. Def. set.
Value
/ x11" No specif.
1
2
hange #
/ x11" No specif.
1
2
Value
hange #
Section 7 COPIER MANAGEMENT
2
Use the numeric keys on the keypad to enter the default
copy limit. The limit can be set to any 1-page increment up
to 999,999.
Inch specifications
Def. Val. of coun. limit
Default value of counter limit can be set.
lose
Default setting - Management - Managem. Def. set.
Metric specifications
Def. Val. of coun. Limit
Default value of counter limit can be set.
lose
Default setting - Management - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Back
(1~999,999)
Limited value
999,999
clear
Back
(1~999,999)
Limited value
999,999
clear
lose
lose
7-37